Instruction manual
INITIAL SETUP
When you turn on your television set for
the first time, be sure to place it on a solid
stable surface.
To avoid danger, do not expose the TV
to water, or a heat source
(e.g. lamp, candle, radiator).
Do not obstruct the ventilation grid
at the rear and be sure to leave sufficient
gaps around the unit.
PUTTING THE UNIT ON A PROPER PLACE
11
SOURCE SELECTION
1. Press the TV /AV button on the remote control.
2.
TV, AV, S-Video, Component, HDMI, VGA)
and select any of them using the button or
the ENTER button.
ource
Note:
Before watching please make sure all necessary
cables and devices are connected.
Use the or button to select the options
(
(The screen will change to your desired s ).
TURNING THE UNIT ON FOR THE FIRST TIME
After you have initially connected your TV
antenna or cable(no set top box)
turn the television ON.
A screen will display asking you to run a
Channel Auto Scan to search and receive
available local digital channels.
It is here where you will select antenna options
and run Channel Auto Scan.
Channels will be stored in the TV tuner.
• Press the MENU button on the remote control.
• Using the buttons, scroll to highlight TV mode.
• Press the button to highlight AIR/CABLE.
Please run
Channel Auto Scan
in the TV menu
INPUT SOURCE
TV
AV
S-Video
Component
HDMI
VGA