Flat Panel Television User Manual

5
This appliance shall be connected to a mains socket outlet with a protective earthing
connection. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet. Take care of the cord, or there might be fire or
electrical shock due to broken cord.
Please make sure that the cord is not over hot,
pressed, or tensed. If the cord has problem (the core string emerges or the cord breaks),
please get contact with the dealer.
Connect to Earthing Connection
■ Never allow heavy objects such as the TV set itself to be placed on the power cord. Never
cover the cord with table cloth, for it may lead you to set heavy object on the
cord duo to ignorance.
■ When removing the power plug from the
socket, always hold
onto the plug, never pull by the cord.
■ Don’t set the cord next to heaters.
■ Don’t touch the plug right after it is unplugged to avoid electrical shock.
■ Don’t touch the plug during lightning.
■ Don’t allow cord to become knotted or tangled.
■ Protect
the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
SAFETY INTRODUCTIONS
4
There is high voltage subassembly inside the TV set, which may cause fire or
electrical shock during repair.
There will be damage if the TV drops or breaks.
Don’t interfere with its proper ventilation when the TV is working or has just been
unplugged, or the display may be spoiled or life
shortened due to over heating. In order
to keep proper ventilation, please allow a clearance of 10 inches on each side from the wall.
This appliance should not be exposed to dripping or broken. Continuous use
might cause fire or electrical shock. If the panel gets broken, please unplug
the TV
set, and get contact with the dealer.
Don’t Remove or Rejigger the TV Set
Set the TV on Balanced Spot
Ventilation
NO Quiver or Concussion on TV Set
■ DO NOT remove cover ( or back ).
■ Don’t set the TV on uneven, oblique, or shacking surface.
■ Don’t set any object around the ventilation openings of the appliance.
■ Don’t block the ventilation openings.
■ No inversion of the screen.
■ Don’t cover the appliance with table cloth.
■
Don’t set the appliance on carpet, bedding, or near to curtain.
SAFETY INTRODUCTIONS
Unbefitting power sources may cause fire or electrical shock. The appliance
should be connected to a power supply of the type described in the operating
instructions or as marked on the appliance.
Incorrect connection of power cord may cause fire or electrical shock.
Power Sources
Power Cord Connection
■ Power supply cord should adapt to the socket outlet.
■ Don’t touch the cord with wet hands.
■ Please check the pontes if it is clean ( no dust ) before use.
If it is not, please do the cleaning with dry and soft fabric.
■ Fix the power cord steadily in to the socket outlet to avoid it
becoming flexible, or it may have malfunction.
■ Don’t cut off the cord, for it may debase the performance. If you want to lengthen it,
please make an appropriate one or get contact with the dealer.
■ If you want to change the fuse in the connector plugs, please
change it with the
same resistance and model.
Dispose the Batteries Carefully
■ Incorrect disposal of batteries may cause fire or human damage, and even explosion.
■ Don’t throw batteries into fire or water.
■ Keep the batteries far away from fire or heat.
■ Don’t fetch the batteries with metal forceps.
■ Keep the batteries under cool and dry environment.
■ Match
the batteries to the (+) and (-) marks in the battery compartment.
■ Don’t charge up, dismantle, or joint the batteries.
■ Don’t impact the batteries.
■ Please use the batteries that are appointed in the user ’s manual.
■ Please clean the matter sweeps out of the batteries if they break, and change
a
new pair. If the matters stick to your clothes, please clean it with water downright.
■ Please treat the used batteries with the observance of the local law.
TIf you set the appliance under moisture or dust environment, it might cause
fire or electrical shock due to lampblack
or erosive gas.
Keep the TV Set away from Moisture and Dust
■ Don’t set the TV in kitchen, places nearby heaters, or places of lampblack and
moisture. For heat from high temperature may affect the display or other
components, and cause distortion, meltage, and fire.
■ Don’t set the TV, remote control, or other components under sun
or near heaters.
■ Don’t set the TV where the difference in temperature is great.
Power Cords
Remove the power plug from the socket on occasions when you will not be
using the set for an extended period.
■ Before cleaning, please turn off the TV and unplug the power cord.
Or there might be fire or electrical shock.