TABLE OF CONTENTS SAFETY PRECAUTONS-------------------------------------------------------------------1 IMPORTANT SAFETY INSTRUCTIONS-----------------------------------------------2 OSD MANUAL ------------------------------------------------------------------------------ 2 REMOTE CONTROLLER ------------------------------------------------------------------2 llustration of the keys on the remote control -----------------------------------------3 Menu picture--------------------------------------------------
IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS △ ! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER(OR BACK) TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO USER SERVICEABLE PARTS INSIDE.
OSD Manual Control Panel: These buttons control your TV’s basic features including on-screen menus.
Illustration of the keys on the remote control: 1. POWER 2. INPUT 3. EXIT 4. MENU 5 6. 7. p 8. q 9. AUTO 10. 0-9 11. -/-12.
Menu picture Input mode PC 1Press INPUT button to enter to display the PC and press”menu “to display pc menu 23- 4- Press PROq/ PROp to scroll through the parameters Press y / x to make changes the value of the parameters.
NATIVE: select the color temp to native 9300k:select the color temp to cool 6500k:select the color temp to warm USER: user define COLOR SETTING LANGUAGE:you may select one language from English or france OSD .H: adjust the position of osd menu to left or right OSD .V: adjust the position of osd menu to up or down OSD SETTING TREBLE:adjust the treble sound BASS: adjust the bass BALANCE: Adjust the balance of the audio output from left to right.
Select input signal: PC-RGB/AV/S-VIDEO/TV INPUT SOURCE Input mode AV 1- Press INPUT button to enter to display the AV,press “menu”to display AV menu 23- Press PROq/ PROp to scroll through the parameters Press y / x to make changes the value of the parameters.
Name submenu of Name of submenu Picture of submenu Instructions Picture of submenu Instructions 1、Brightness : Adjust the brightness of the picture, the image becomes brighter as the number increases. 2、Contrast: Adjust the IMAGE SETTING contrast of the picture,the image becomes higher as the number increases. 3、Color :Adjust the color . 4、 TINT :Adjust the tone of the picture. 5、Sharpness: Adjust the amount of detail enhancement, the image sharpness rises as the number increases.
TREBLE:adjust the treble sound BASS: adjust the bass BALANCE: Adjust the balance of the audio output from left to right. MUTE: turn off/on sound VOLUME: adjust the value of sound SOUND SETTING Return the value of default RESET Select input signal: PC-RGB/AV/S-VIDEO/TV INPUT SOURCE Input mode s-video 1 Press INPUT button to enter to display the S-VIDEO,press “menu”to display s-video menu 2 Press PROq/ PROp to scroll through the parameters 3 Press y / x to make changes the value of the parameters.
1、Brightness : Adjust the brightness of the picture, the image becomes brighter as the number increases. 2、Contrast: Adjust the IMAGE SETTING contrast of the picture,the image becomes higher as the number increases. 3、Color :Adjust the color . 4、 TINT :Adjust the tone of the picture. 5、Sharpness: Adjust the amount of detail enhancement, the image sharpness rises as the number increases.
Name of submenu Picture of submenu Instructions LANGUAGE:you may select one language from English or french OSD .H: adjust the position of osd menu to left or right OSD .V: adjust the position of OSD SETTING osd menu to up or down TREBLE:adjust the treble sound BASS: adjust the bass BALANCE: Adjust the balance of the audio output from left to right.
Name submenu of Picture of submenu Instructions 1、Brightness : Adjust the brightness of the picture, the image becomes brighter as the number increases. 2、Contrast: Adjust the contrast IMAGE SETTING of the picture,the image becomes higher as the number increases. 3、Color :Adjust the color . 4、 TINT :Adjust the tone of the picture. 5、Sharpness: Adjust the amount of detail enhancement, the image sharpness rises as the number increases. 1:CHANNEL: select the TV chanel 2:TV MODE: Select the TV standard.
Name of submenu Picture of submenu Instructions LANGUAGE:you may select one language from English or french OSD .H: adjust the position of osd menu to left or right OSD .V: adjust the position of OSD SETTING osd menu to up or down TREBLE:adjust the treble sound BASS: adjust the bass BALANCE: Adjust the balance of the audio output from left to right.
CONNECTION AND PREPARATION Remove the back plate at the back of the TV as shown on the illustration opposite. Lay the LCD TV with the screen down on a table, as it will be easier to connect your peripheral equipment. Please take precaution not to damage the screen.
Production Specifications: Panel spec TV System Picture Sound Cell Type Active size Display Area resolution Pixel Pitch Brightness / Contrast Viewing Angle(L/R/U/D) Response Time Color System Sound System Progressive Scanning Color Tint Control Digital Comb Filter Picture Mode Speaker Output(RMS) Sound Mode Color active matrix TFT (Thin-Film-Transistor) LCD panel 15 inch 304(h) x 228 (v) MM XGA 1024(H) X 768(V) 0.297 x 0.297 250 nit/ 450:1 80/80/60/55 16ms NTSC.
Gross weight Original size 5kg 525(L)x195(w)x390(H) Maintaining Your TV Periodically cleaning the exterior of your TV can reduce the chance of dust being collected which can block the ventilation holes; hence, prolonging the life of your TV. Please refer to the instructions below for cleaning your TV: 1. Unplug the power Unplug the LCD TV from the wall outlet before cleaning the TV. 2. Avoiding water and liquid Never spray or pour any liquid directly onto the screen or case.
Troubleshooting When there is no picture or sound • Make sure the AC adapter is properly inserted in the Power outlet. • Reception other than those of broadcasting stations can be considered. • Make sure the input mode is set to TV. • Make sure the main power switch of the main unit is on. When there is no picture from AV. • Make sure the BLACK LEVEL is properly adjusted. • The fluorescent lamp may have reached the end of service life. • Make sure the video I/P terminal is not free of connections.
When the picture is not clear. • • • The reception may be weak. The state of the broadcast may also bad. Make sure the antenna is not disconnected. When the picture is light or improperly tinted. • • Check color adjustment. Check color system setting. When the picture is too dark. • Press the Brightness button. • Check PICTURE and BLACK LEVEL adjustment. • The fluorescent lamp may have reached the end of service life. When the remote control does not work.
When the picture is not sharp. • • • The reception may be weak. The state of the broadcast may also be bad. Make sure the antenna is not disconnected. When the picture moves. • • • The reception may be weak. The state of the broadcast may also be bad. Make sure the antenna is not disconnected. When the picture is doubled or tripled. • Make sure the antenna is facing the right direction. • There may be reflected electric waves from mountains or buildings. The picture is spotted.
LCD TV MANUALE D’USO When there are stripes on the screen or colors fade. • Is the unit receiving interference from other devices? • Transmission antennas of radio broadcasting station and transmission antennas of amateur radio and cellular phones may also cause interference. • Use the units as far apart as possible from device that may cause possible interference.
