OPERATING INSTRUCTIONS MODEL：LCD 1922A Please read this manual before connection and use
INDEX 1 2 3 4 5 6 7 8 Safety notice items................................................................................................. 2-4 Accessories ............................................................................................................... 4 Product Overview ...................................................................................................... 4 Control Panel Overview ............................................................................................
1- Safety notice items Preparation For ventilation, leave a space of at least 10cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in moderate climates. Please read the following recommended safety precautions carefully for your safety. 1. Power Source The TV set should be operated only from a 120 V AC, 60Hz outlet. Ensure that you select the correct voltage setting for your convenience. 2.
7. Lightning In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet. 8. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in fire, electrical shock, or other hazards. 9. Servicing Please refer all servicing to qualified personnel.
Note: This device is not suitable for a long-time display of still pictures, including logos, video games, computer games, Teletext and screen non-filling contents. Any persistent images caused by displaying still pictures, logos, video games, computer images, Teletext and screen non-filling contents cannot be erased. These do not represent any malfunction and will not be covered by the manufacturer’s warranty." PE Connection to mains Be sure to ground the connection properly.
4- Control Panel Overview (1) Control Panel Functions: 1234567- – To select the input signal: TV/VIDEO/S-VIDEO/YPbPr/PC/HDMI – Enter into MENU – TV channel up – TV channel down – Volume up / Right orientation – Volume down / Left orientation – Power supply switch INPUT MENU CH+ CHVOL+ VOLPOWER Indicator Light Status The indicator light is red when the TV is in standby mode.
5- Remote Control Overview 14. MUTE 15. POWER 1. DISPLAY 16. 0-9 2. FAV 3. INPUT 4. GUIDE 17. - 5. ZOOM 6. CH+ / CH- 18. RECALL 7. 19. VOL+/ VOL- 8. 20. CCD 9. MENU 10. ENTER 11. SLEEP 21. MTS 12. EXIT 22. PICTURE 13. CH.LIST 23.
1- Illustration of the keys on the remote control: 1. DISPLAY Screen Display ON/OFF 2. FAV Favorite channel 3. INPUT Select TV / VIDEO / S-VIDEO / YPbPr / PC / HDMI 4. GUIDE Display digital program information 5. ZOOM Switch to different display mode 6. CH + / CH- Change TV channels 7. ▲ ▼ Control the on-screen menu up/down cursor 8. ◀ ▶ Control the on-screen menu left/right cursor 9. MENU Display on-screen menu 10. ENTER Press to confirm 11.SLEEP Press to set sleep timer 12.
6- Connecting Input Signals to TV A) Connect with TV signal Connection steps： z z z z z Power your LCD TV off. Connect an antenna cable (CATV) to the corresponding interface connector (75 Ω ANT) on the back of the LCD-TV. Connect the other end of the antenna cable to the antenna connector on the wall or on your digital cable / satellite receiver. Now you are able to view regular cable TV. Turn on the power of the LCD-TV. Press the INPUT button to set the video input mode of the LCD-TV to “TV” mode.
D) Connect with HDMI signal Connection steps： z z z z z z Read the user guide supplied with your AV devices and ensure that it has a “HDMI” connector; Power your LCD TV off. Connect a HDMI cable to the corresponding interface connector on the back of the LCD-TV. Turn on the power of the LCD-TV. Press the INPUT button to set the video input mode of the LCD-TV to “HDMI” mode.
7- TV Operation (1) Basic operation Initial Setup Menu NOTE: If this is the first time you turn on the LCD TV, the Initial Setup Menu will display. Menu Language Select the preferred language when viewing on screen menus. Use the ENTER/► to select language. Tuning Band Select Tuning Band mode. Press ENTER/► button to select Air/Cable STD/Cable HRC/Cable IRC/Cable Auto. Auto Channel Search When using your LCD TV for the first time. Please scan for all available broadcasting channels in your local area.
Volume Control 1. Press VOL+/-button to adjust the volume 2. Press MUTE button to mute the TV, Press MUTE button again or VOL+/- button to cancel the mute function. The On Screen Display (OSD) may display different screen settings based on the input signal of use. On Screen Display Adjustment - Press MENU button to display the main menu. - Press◄/►/▲/▼buttons to select/adjust the each setting.
PICTURE menu options 1. Press MENU button on the side panel or the remote control to display the main menu. 2. Press ▲/▼ button to select the PICTURE menu, then press ► button for the submenu. 3. Press ▲/▼ button to select the item you want to adjust. 4. Press ENTER/► button repeatedly to adjust the value. 5. When you are satisfied with your choice, press ◄ button to go to the previous menu, or press MENU/EXIT button to exit.
Aspect Ratio Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the aspect the aspect ratio of the picture. (Available aspect ratio: Full Screen, Normal, Zoom, Wide, Cinema, Waterglass, Fullscreen) AUDIO menu options 1. Press MENU button on the side panel or the remote control to display the main menu. 2. Press ▲/▼ button to select the AUDIO menu, then press ► button for the submenu. 3. Press ▲/▼ button to select the item you want to adjust. 4.
Setup menu options 1. Press MENU button on the side panel or the remote control to display the main menu. 2. Press ▲/▼ button to select the SETUP menu, then press ► button for the submenu. 3. Press ▲/▼ button to select the item you want to adjust. 4. Press ENTER/► button repeatedly to adjust the value. 5. When you are satisfied with your choice, press ◄ button to go to the previous menu, or press MENU/EXIT button to exit. Tuning Band Select Tuning Band mode.
Manual Channel Set 1. Press ENTER button to display a channel list that you can select channel as below: 2. Press ► button to label each channel “Viewable” or “Not Viewable” hannel labels Allows you to name the channel selected. Press ◄/► button to select the position of letter, press ▲/▼ button to set the name. Menu Language Press ▼ / ▲ button to select this item, then press ENTER/► button to select the On Screen Display (OSD) language.
Feature menu options 1. Press MENU button on the side panel or the remote control to display the main menu. 2. Press ▲/▼ button to select the FEATURE menu, then press ► button for the submenu. 3. Press ▲/▼ button to select the item you want to adjust. 4. Press ENTER/► button repeatedly to adjust the value. 5. When you are satisfied with your choice, press ◄ button to go to the previous menu, or press MENU/EXIT button to exit.
Noise Reduction Press ENTER/◄/► button to select the level of noise reduction from Off/Low/Medium/High. Color Temperature Press ENTER/◄/► button to select the color temperature from Cool/Normal/Warm. 3D/YC Press ENTER/◄/► button to set the 3D/YC On or Off. Adaptive Contrast Press ENTER/◄/► button to set the Adaptive Contrast On or Off. Gradient Enable Press ENTER/◄/► button to set the Gradient Enable On or Off. Blue Screen Press ENTER/◄/► button to set the Blue Screen On or Off.
Master Lock Press ENTER/► button to set the Master Lock On/Off. If you set this function on, all the parental control lock will be unavailable and it can play all kinds of programs. Unrated Lock Press ENTER/► button to set the Unrated Lock On/Off. If you set this function on, all the programs will be locked even they are unrated programs. US Ratings Press ▼ / ▲ button to select this item, then press ENTER/► button for US Ratings Menu.
Advanced Rating Press ▼ / ▲ button to select this item, then press ENTER/► button to set advanced rating on/off. Closed Caption Press ▼ / ▲ button to select this item, then press ENTER/► button for Closed Caption Menu. CC Mode Press ENTER/► button to select CC Mode from CC Off / CC On / CC ON Mute. Analog CC Press ENTER/► button to select Analog CC Mode. Digital CC Press ENTER/► button to select Digital CC Mode. Advanced CC Settings Press ENTER/► button for Advance CC Settings Menu.
Feature menu options in PC Mode Press Input button to select the input source to PC Mode. PC Set Press ▼ / ▲ button to select PC Set, then press ENTER/► button for PC Setting Menu. H-Position Press ENTER/► button to adjust the horizontal position of the picture. V-Position Press ENTER/► button to adjust the vertical position of the picture Clock Press ENTER/► button to adjust the clock rate of the picture. Phase Press ENTER/► button to adjust the phase of the picture.
Feature menu options in YPbPr Press INPUT button to select the input source to YPbPr. YPbPr Set Press ▼ / ▲ button to select YPbPr Set, then press ENTER/► button for YPbPr H-Position Press ENTER/► button to adjust the horizontal position of the picture. V-Position Press ENTER/► button to adjust the vertical position of the picture Clock This function is unavailable in component mode. Phase Press ENTER/► button to adjust the phase of the picture. Auto Adjust This function is unavailable in component mode.
8- Technical Specifications *Cable channels may vary depending on your cable provider. TV-SYSTEM ATV system NTSC-M DTV system 8VSB/QAM Max. Storage Channel 800CH RECEIVING CHANNEL Air, Cable STD, Cable HRC, Cable IRC PROGRAM CHANNES Air 2-69, Cable 1-135* OPERATING VOLTAGE 120V AC, 60Hz AUDIO Stereo AUDIO OUTPUT POWER (%10 THD) 2 x 3W OSD Languages English, French, Spanish POWER CONSUMPTION(W) 60 W standby< 3W 16:10 wide screen, 19-inch screen PANEL SIZE (mm) WIDE 19.
