50" LED TV PLDED5066A-C ENERGY PERFORMANCE VERIFIED EP4005285 RENDEMENT ENERGETIQUE VERIFIE
Contents Safety and warnings.......................................................................................2-3 Introduction..................................................................................................4 Stand installation guide................................................................................. 5 Wall Mount ................................................................................................... 6 Installation................................................
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTION CAUTION ENERGY STAR is a joint program of the U.S. Environmetal Protection Agency and the U.S. Department of Energy helping us all save money and protect the environmetal through energy efficient practices. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this Television near water. 6) Clean only with dry cloth.
SAFETY AND WARNINGS High voltages are used in the operation of this television receiver. Do not open the cabinet. Refer servicing to qualified service personnel. Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls. To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture. Do not place your television on an unstable cart, stand, shelf or table.
INTRODUCTION Main features Accessories Integrated ATSC TV tuner for HDTV broadcast reception High brightness provides a vivid and brilliant picture ■ High dynamic contrast ratio for deeper blacks and brighter whites ■ Wide Screen aspect ratio (16:9) for a complete home theater experience ■ HDMI input for true digital connection ■ VGA port for connection to PC ■ Integrated Built-in stereo speaker system ■ Full-function remote control This product default mode (standard mode) already pass the Energy star t
Base Stand Assembly Instructions 1. Place the TV with the display side down on a flat surface. Use a cloth to protect the display. Position the base stand onto the bottom of the stand neck. Screws x 4pcs 4x43PWM 2. Attach the base stand to the stand neck firmly tightening the supplied screws.
WALL MOUNT Instruction for Wall Mount A wall mount kit (purchased separately) would allow you to mount your PROSCAN TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. Dimensions for Mounting Hole Pattern 200mm 200mm - This PROSCAN TV is compatible with a 200mm x 200mm mounting hole pattern.
INSTALLATION Panel keys Front panel 1 2 3 1 30 YPbPr CC TV CH LIST EPG MTS VGA AV HDMI FAV TV DISPLAY S.M VOL CH P.M 1: Remote control sensor. 2: Indicator LED: BLUE RED 3: 3 4 5 1. SOURCE: Display the input source menu. 2. MENU: Display main MENU. 3. CH+/CH-: In TV mode, press "CH+" or "CH-" to change the channel up and down. In MENU mode, press "CH+" or "CH-" to select items in standby mode, press "CH+" or "CH-" to turn on the TV. 4. VOL+/VOL-: Adjust sound level.
INSTALLATION ANTENNA Note: Aerial connections: IEC (female). Input impendance:75 unbalanced. PC STEPS: It is recommended that the TV and computer are off before making any of the connections. 1.Connect the VGA and audio cable. 2.Connect the power cord. 3.Power on the TV, switch to PC mode. 4.Power on the PC.
INSTALLATION AV L R Y Pb AC-INPUT 100-240V~50/60Hz PC PRESET MODE RESOLUTION V.Freq.(Hz) H.Freq.(KHz) 1 720*400 70 31.47 2 640*480 60 31.47 3 640*480 75 37.50 4 800*600 60 37.88 5 800*600 75 46.88 6 1024*768 60 48.36 7 1024*768 70 56.48 8 1024*768 75 60.02 9 1280*768 60 47.3 10 1280*1024 60 63.98 11 1280*1024 75 80.00 12 1920*1080 60 67.
INSTALLATION AV EQUIPMENT You can use the input terminals on the TV set as follows.
REMOTE CONTROL 1 9 27 23 YPbPr CC MTS VGA DTV STRENGTH TV AV HDMI CH LIST EPG FAV 24 21 26 22 16 25 19 20 15 17 18 3 8 11 4 5 TV DISPLAY 12 13 S.M 6 CH VOL 14 P.M 7 2 10 Universal Remote Code: 0X0707 1: POWER Press to turn the TV on or to turn off (standby). 2: NUMBER KEY Press to input the channel number. 3: Press to display the on-screen menu. 4: CURSOR Use the up, down, left, and right keys to move within the menu. 5: EXIT Press to exit the on-screen menu.
OPERATION 1. PICTURE MENU In this menu,you can adjust the picture effect here, such as contrast, brightness, etc. Press to select, press ENTER to adjust. Picture Mode Color Temperature VGA Setting Aspect Ratio Noise Reduction < Standard Normal 3. TIMER MENU Normal Middle > Picture Note: 1).Audio language is available in ATSC/TV Programming only. 2).Auto volume is available only when the input signal volume is too large or there is distortion.
OPERATION 1).CC Mode: Switching close caption mode. 2). Advanced selection: only ATSC program is available. 3).Option: Used to edit CC font. Note: 1).Restore Default: Restore Default will clear all the programs and reset all the settings to default value.
OPERATION 6.1 Air/Cable: Select Air TV signal and cable TV signal. 6.2 Auto Scan: If it's the first time you use the TV, you should scan all the TV channels first, Press ENTER button to confirm, you will see the menu Description Rating E Exempt: Includes news, sports, documents and other information programming: talk shows, music videos, and variety programming. Children: Intended for younger children under the age of 8 years.
TROUBLE SHOOTING Trouble phenomenon Symptom Inspection Check Picture Audio Snow Noise antenna position, direction or connection Ghost Normal audio antenna position, direction or connection Interference Noise electronic equipment,car/ motorcycle,fluorescent light Mute Volume (check if mute is activated or if the audio system connections are not correct) Normal Picture Power cord is not inserted Power switch is not opened Contrast and brightness/volume setup Press standby key on the remote cont
