Datasheet
SPECIFICATIONS
Display 6 digit LCD, 5 or 7mm high, 6 o’clock viewing angle
Range & Resolution Hour meters: 99,999.9 hours
Counters: 999,999 counts
Accuracy Hour meters: 0.1%
Counters: ±1 count
Humidity 95%, non-condensing at 38°C
Operating Temperature –40°C to +85°C (–40ºF to +185ºF)
Storage Temperature –50°C to +85°C (–58ºF to +185ºF)
Mechanical Shock SAE J 1378, 55g
Mechanical Vibration SAE J 1378, 20g
Operating Frequency 48 to 440 Hz
(AC powered units)
Memory Main power must be applied for 5 seconds to arm memory (with no loss of time/counts).
EEPROM, data retained for 25+ years without power.
Current Consumption 0.5mA max. @ 5VDC (0512D models)
(Power Terminals) 0.8mA max. @ 12VDC (1248D models)
1.0mA max. @ 120VAC
2.0mA max. @ 230VAC
Input Signal (DC-only) Counters (703 only): 500 Hz. max., 50% duty cycle (1ms low, min., between consecutive highs).
Input Signal (AC/DC) Hour meters (701 only): Power must be applied for 0.5s, min., to accumulate time.
Counters (703 only): 1 Hz. max., 50% duty cycle (500ms low, min., between consecutive highs)
Reset 5ms min. at operating voltage. Main power must be applied for a minimum of 250ms prior to reset signal.
NOTES:
1. Mating connector must be installed.
2. Equivalent to Delphi-Packard connector P/N 12162000 2-pin.
3. Equivalent to Delphi-Packard connector P/N 15336035 4-pin.
4. Equivalent to Molex connector P/N 43045–0412.
5. UL files AU1841 and E45175.
6. R(5mm) and Q housings also available in a 65/65 version
(see model encodement).
7. F= 1/4”, T= 3/16”
700 SERIES
Case Bezel Lens Case IP Rating Termination UL
5
/CE Suggested Panel
Style Shape Material Material Front/Rear Cutout m
D Rectangular Acrylic ABS 65/50 3/16” Spade Yes 45.0 x 22.2
F/T Hexagonal Acrylic ABS 65/65 Spade
7
Yes 36.8 x 24.1
G Hexagonal Acrylic ABS 65/65
1
Packard (2 pin)
2
Yes 36.8 x 24.1
J Hexagonal Acrylic ABS 65/65
1
Packard (4 pin)
3
Yes 36.8 x 24.1
L Rectangular Polycarbonate Polycarbonate 65/40 Molex
4
Yes 36.8 x 24.1
Q Round Glass Polycarbonate 65/50
6
1/4” Spade Yes ø52 (ø2–1/16)
R (5mm) Round Glass Polycarbonate 65/50
6
3/16” Spade Yes ø52 (ø2–1/16)
R (7mm) Round Glass Polycarbonate 65/50 1/4” Spade Yes ø52 (ø2–1/16)
S Square Glass ABS 52/50 1/4” Spade Yes 45.0 x 45.0
Y Rectangular Acrylic ABS 65/65
1
Packard (4 pin)
3
Yes 36.8 x 24.1
Z Rectangular Acrylic ABS 65/65 1/4” Spade Yes 36.8 x 24.1