Specifications

Curtis PMC 1223/33, 1225/35, 1227/37 Manual
59
6 — PROGRAMMER OPERATION
Program Menu Notes
(For more detail on these options, see Section 3: Programmable Parameters.)
1
Throttle types
Type 0: wigwag (5kΩ pots or 5V throttles)
Type 1: inverted wigwag (5kΩ pots or 5V throttles)
Type 2: single-ended (0–5kΩ)
Type 3: single-ended (0–5V)
2
Direction input types
Type 0: wigwag throttle input
Type 1: single direction input
Type 2: dual direction input
3
SRO types
Type 0: no SRO
Type 1: SRO on KSI/power enable input plus direction input
Type 2: SRO on KSI/power enable input plus forward direction input
4
Program 1 driver types
Type 0: electromagnetic brake driver
Type 1: brake light driver
Type 2: brush contactor driver, off at neutral with no delay
Type 3: brush contactor driver, off at neutral with 2 second delay
Type 4: brush contactor driver, off at neutral and reverse with no delay
Type 5: brush contactor driver, off at neutral and reverse with 2 second delay
Type 6: hour meter driver, off when power enable is off
5
Program 2 driver types
Type 1: brake light driver
Type 2: brush contactor driver, off at neutral with no delay
Type 3: brush contactor driver, off at neutral with 2 second delay
Type 4: brush contactor driver, off at neutral and reverse with no delay
Type 5: brush contactor driver, off at neutral and reverse with 2 second delay
Type 6: hour meter driver, off when power enable is off
Type 7: hour meter driver, off when electromagnetic brake is engaged
Type 8: belly button wiring check