Specifications

Curtis PMC 1223/33, 1225/35, 1227/37 Manual vi

FIGURES

FIG. 17: Examples of speed curves with the speed limit pot

in its maximum speed position ........................................ 30

FIG. 18: Examples of speed curves with the speed limit pot

in its minimum speed position ........................................ 31

FIG. 19: Example of reverse speed curve ........................................ 32

FIG. 20: Effect of adjusting the neutral deadband parameter ......... 36

FIG. 21: Effect of adjusting the throttle gain parameter ................. 37

FIG. 22: Ramp shape (throttle map) for controller

with maximum speed set at 100%

and creep speed set at 0 ................................................... 38

FIG. 23: Ramp shape (throttle map) for controller

with maximum speed set at 100%

and creep speed set at 10% .............................................. 39

FIG. 24: Ramp shape (throttle map) for controller

with maximum speed set at 60%

and creep speed set at 10% .............................................. 39

FIG. 25: Bench test setup for verifying and adjusting

the controller’s parameters ............................................... 51

FIG. B-1: Mounting dimensions, Curtis PMC standard

5kΩ, 3-wire throttle pot ................................................ B-1

FIG. B-2: Mounting dimensions, Curtis PMC potboxes ............... B-1

FIG. B-3: Mounting dimensions, Curtis PMC footpedal .............. B-2

FIG. B-4: Mounting dimensions, Curtis electronic throttle ........... B-2