Specifications

Curtis PMC 1223/33, 1225/35, 1227/37 Manual v

FIGURES

FIG. 1: Curtis PMC 1221, 1225, and 1227

electronic motor controllers, with

handheld 1307 programmer ................................................ 1

FIG. 2: Mounting dimensions,

Curtis PMC 1223/33 controllers......................................... 6

FIG. 3: Basic wiring conﬁguration with on/off switches,

1223/33 controllers ............................................................. 8

FIG. 4: Basic wiring conﬁguration with momentary switches,

1223/33 controllers ............................................................. 9

FIG. 5: Mounting dimensions,

Curtis PMC 1225/35 controllers....................................... 10

FIG. 6: Basic wiring conﬁguration with on/off switches,

1225/35 controllers ........................................................... 12

FIG. 7: Basic wiring conﬁguration with momentary switches,

1225/35 controllers ........................................................... 13

FIG. 8: Mounting dimensions,

Curtis PMC 1227/37 controllers....................................... 14

FIG. 9: Basic wiring conﬁguration with on/off switches,

1227/37 controllers ........................................................... 16

FIG. 10: Basic wiring conﬁguration with momentary switches,

1227/37 controllers ........................................................... 17

FIG. 11: Wiring for 0–5V throttle ................................................... 19

FIG. 12: Wiring for Curtis ET-XXX electronic throttle................... 20

FIG. 13: Effect of speed limit pot position on speed curves ............. 21

FIG. 14: Wiring of speed limit input to enable maximum speed

when no speed limit pot is used ........................................ 22

FIG. 15: Wiring to check the emergency reverse input wiring

(belly button check)........................................................... 23

FIG. 16: Wiring to inhibit operation during battery charging ......... 25

FIGURES