Specifications

Curtis PMC 1223/33, 1225/35, 1227/37 Manual
28
3 — PROGRAMMABLE PARAMETERS
The programmable parameters are described in the following order. They
are listed in the text by the abbreviated names that appear in the programmer’s
Program Menu. Not all of these parameters are displayed on all controllers; the
list for any given controller depends on its specifications.
Acceleration/Deceleration Parameters
Acceleration Rate, M1/M2
Forward Deceleration Rate, M1/M2
Reverse Deceleration Rate, M1/M2
Speed Parameters
Maximum Speed, M1/M2
Minimum Speed, M1/M2
Reverse Speed
Creep Speed
Emergency Reverse Speed
Throttle Parameters
Throttle Type
Direction Change Input Type
Throttle Autocalibration
Throttle Deadband
Throttle Gain
Ramp Shape (Static Throttle Map)
Current Limit Parameters
Main Current Limit, M1/M2
Emergency Reverse Current Limit
Calibration 5: Regen Current Limit Boost
Output Driver Parameters
Program 1 Auxiliary Driver
Program 2 Auxiliary Driver
Program 4: Brake Holding Voltage
Fault Parameters
High Pedal Disable (HPD)
Static Return to Off (SRO)
Other Parameters
IR Compensation, M1/M2
Calibration 4: IR Stiffness