Specifications

Logic

Controller checks for the throttle signal to be above 0.1 V.

LED

Code

Dash

Display

Model Programmer Display

2,1 Code

MTR005-E,

MTR007-E,

MPC060-E,

MPC080-E

Throttle Wiper Low

Condition

Voltage from the throttle

sensor is too low.

Truck Response

No Traction

Possible Causes and Test

Procedures

1. Throttle sensor not

centered.

Center the sensor at the

control handle.

Sensor output = 2.5 V

when centered. See

Electrical System 2200

YRM 1052.

2. Failed throttle sensor.

Replace throttle sensor.

3. Improper parameters on

software.

4. Interface module

defective.

5. For testing procedures

refer to Control Card

Functional Test in this

section.

Circuit Description

524164719-2200YRM0928-(07-2010)-US-EN

http://www.yaleaxcessonline.com/lib/service/US/EN/html/2200YRM0928...

24 of 33

4/29/2013 7:30 PM