Specifications

NOTE: The following symbols and words indicate safety information in
this manual:
WARNING
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury and property damage.
On the lift truck, the WARNING symbol and word are on orange
background. The CAUTION symbol and word are on yellow
background.
TABLE OF CONTENTS
General
Safety Precautions
Description
Curtis PMC 1297 Transistor Motor Controller
Principles of Operation
Install
Programming Controller
1307 Programmer Handset
Description/Features
Scroll Display Keys
Change Value Keys
More Info Key
Operation
Connecting Handset to Traction Motor Controller
Disconnecting Handset From Traction Motor Controller
Programmer Self-Test
Menu Selections
Program Menu
Test Menu
Diagnostics Menu
Diagnostic History
Special Program Menu
Programming Traction Motor Controller - 1307 Handset
1311 Programmer Handset
Description/Features
Menu Navigation Key
Data Increase/Decrease Key
Bookmark Keys
Operation
Connecting Handset to Traction Motor Controller
Disconnecting the Handset From the Traction Motor Controller
Main Menu Selections
Program Menu
Monitor Menu
Faults Menu
Functions menu
Information Menu
Programmer Setup Menu
Programming the Traction Motor Controller - 1311 Handset
Parameters
Adjusting Parameters
Top Speed
Acceleration
Neutral Braking
Plug Braking
Coast Braking (MPE060-E/MPE080-E Only)
Empty Volts
Battery Discharge Indicator (BDI)/Hourmeter
LED Fault Codes
Control Card Functional Test
This section is for the following models:
MPE080-E [A890];
MPW080-E [A891];
MPW065-E [A894];
MPE060-E [A896];
MPW060-E [A897];
MTR005-E [A902];
MTR007-E [A903];
MPC060-E [A904];
MPC080-E [A905]
General
This section describes the Curtis 1297 Transistor Motor Controller. Procedures are outlined for
controller programming and troubleshooting.
SAFETY PRECAUTIONS
WARNING
Disconnect the battery and separate the connectors before opening the compartment cover or
inspecting or repairing the electrical system. If a tool causes a short circuit, the high current
524164719-2200YRM0928-(07-2010)-US-EN
http://www.yaleaxcessonline.com/lib/service/US/EN/html/2200YRM0928...
2 of 33
4/29/2013 7:30 PM