Specifications

Figure 16. Menu Selection
Functions menu
The FUNCTIONS menu is used to copy data between motor controllers or reset the data in a
controller to the original settings. Use the menu navigation key to select the FUNCTIONS menu to
access the SETTINGS menu. See Figure 17. From this menu you can upload the parameter block
from an existing controller and download that parameter block into another motor controller. See
Figure 18.
Each time the programmer is connected to a motor controller, it uploads the present data from the
controller into the programmer. Using the SETTINGS menu, this original information can be
downloaded into the controller at any time to restore the controller with the original data. Any
inadvertent change in controller parameters can be undone using this feature as long as the
programmer has not been disconnected from the controller or the power has not been removed from
the controller.
Figure 17. Menu Selection
Figure 18. Menu Selection
Information Menu
The INFORMATION menu will display information about the controller. Use the menu navigation key to
select the information menu and all specific controller information will be displayed on the screen. See
Figure 19.
524164719-2200YRM0928-(07-2010)-US-EN
http://www.yaleaxcessonline.com/lib/service/US/EN/html/2200YRM0928...
15 of 33
4/29/2013 7:30 PM