Owners manual

Curt Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
KEEP IN VEHICLE FOR FUTURE REFERENCE
60630 QUICK GOOSE 2 Page 5 of 6
Parts List
DESCRIPTIONPART NUMBERQTYITEM
TOP PLATE WELDMENT / CARBIDE BLACKCM-C630-TPW11
FLIPPER LEVER SHAFT / ZINC PLATEDCM-C630-FLS
12
16mm SOLID SHAFT COLLAR WITH SET SCREW / CLEAR ZINC16 ID x 12_7-SSCA23
16.2mm ID x 3mm TH WHITE UHMW NYLON WASHER16_2 ID x 3-NW24
BALL FLIPPER LEVER / ZINC PLATEDCM-C630-BFL
15
12mm DIA. x 1.3 THICK SHAFT E-CLIP / BLACK OXIDE12mm x 1_3-SEC
26
QUICK GOOSE BALL ASSEMBLYCM-C630-QGBA17
PULL ROD RIGHT WELDMENT / CLEAR ZINC WITH SUPERSEALCM-C630-PRRW18
LINKAGE FLIPPER LEVER / ZINC PLATEDCM-C630-LFL19
LINKAGECM-C630-L210
C630 CHOKERCM-C630-CH111
COMPRESSION SPRING / CLEAR ZINCCM-LC-072J-12MW
112
PULL ROD LEFT / CLEAR ZINC WITH SUPERSEALCM-C630-PRL
113
CHROME CYLINDER RINGCM-C630-CCR114
M5 x 0.8 x 20mm FLAT HEAD SOCKET CAP SCREWM5 x 0_8-CSS615
BLACK ROD GRIPCM-C630-BRG
116
RED ROD GRIPCM-C630-RRG117
M6 x 1 x 35 HEX BOLT / GRADE 8.8 / ZINC PLATEDM6 x 1 x 35-HB418
M6 x 1 THIN NYLON LOCK NUT / ZINC PLATEDM6 x 1-TNLN419
EXTENSION SPRING / ZINC PLATEDCM-LE-093G-7MW120
RUBBER COVERCM-C-145121
U-BOLT KITCM-C630-UBK
122
22
21
20
19
18
17
16
15
14
8
13
12
11
5 2 6
4
3
10
9
1
7