Installation Guide

56436-INS-RA
•
PAGE 4
Step 8
Route the green wire to the passenger side,
up and out of the way. Repeat step 6 to route
the green wire to the passenger-side taillight
housing. Route the trailer 4-flat to the center of
the vehicle and mount near the hitch. Secure
any loose wires with the provided zip ties.
Route the black power wire from
the vehicle battery as shown on
the last page of this manual.
NOTICE
Once 12 volt power wire is connected to the
harness verify that the harness is functioning
by attaching the battery and testing with a test
light, 4-flat tester, or a functioning trailer.
Reinstall all items removed during harness
install, and reconnect the negative battery
terminal. Install the provided 4 flat dust cover
to help prevent corrosion.