Installation Guide

If copying/pasting, eye-drop this text to

ensure a uniform look for all installation

paragraphs.

1. Starting on the drivers side along the

frame rail locate the vehicles taillight wiring

harness there will be connectors matching

those on the T-connector.

2. Separate the vehicles connectors making

sure not to damage the locking tabs.

Insert the the T-connector end with the

yellow wire in-between the separated

connectors.

3. Route the T-connector end with the

green wire to the passenger side. Make

sure to avoid areas that may cut or pinch

the wire. Repeat step 2 on the passengers

side using the green wire.

4. Route the 4-ﬂat to the center of the

vehicle and secure in a convenient out of

the way location. Seecure any loose wires

with the cable ties provided.

WARNING!

Verify miscellaneous items that may be

hidden behind or under any surface before

drilling to avoid damage and/or personal

injury.

03/20/09

55317

DODGE DAKOTA

DODGE PICKUP

DODGE RAM FULLSIZE

DODGE RAMCHARGER

PLYMOUTH TRAILDUSTER

PAGE 1
55317 DODGE DAKOTA DODGE PICKUP DODGE RAM FULLSIZE DODGE RAMCHARGER PLYMOUTH TRAILDUSTER 03/20/09 1. Starting on the drivers side along the frame rail locate the vehicles taillight wiring harness there will be connectors matching those on the T-connector. 2. Separate the vehicles connectors making sure not to damage the locking tabs. Insert the the T-connector end with the yellow wire in-between the separated connectors. 3. Route the T-connector end with the green wire to the passenger side.