Installation Guide

C
D
A B
INSTALLATION
/
SAFETY INSTRUCTIONS
Step 1
Locate the black electrical junction box under the dash, to the
left of the steering column. Remove the box cover and locate
the empty vehicle connection point (A,B).
Step 2
Insert the connector on the CURT brake control harness into
the vehicle connection point. Make sure the connector is fully
inserted with locking tabs in place (C).
Step 3
Insert the brake control harness's black connector into the brake
control's quick plug connector (D). Secure the brake control
harness with the provided cable ties, avoiding any pinch points.
Step 4
Complete the installation using the brake control instructions.
Mount the unit as directed and perform test procedures as
instructed in the brake control user manual.
CURTMFG.COM • NEED ASSISTANCE? • 877.287.8634 • RB • PAGE 2