Installation Guide

51441
KIA BORREGO
1. Locate the vehicle’s electric brake control
harness connector under the dash and left of
the steering column, taped to another
harness near the emergency brake pedal.
There will be a 4-pin connector that mates
with the one on the adapter.
2. Plug the adapter harness into the vehicle’s
electric controller connector. Use butt
connectors and attach the wires from the
adapter to the corresponding wires on the
electric brake control, following the brake
control manufacturer's installation
instructions.
3. Complete the installation per the electric
brake control manufacturer’s instructions
and mount the unit as directed. Perform
test procedures as instructed.
NOTE
Vehicles not equipped with OEM trailer tow
package, may require fuses and relays to
complete output and battery feed circuits
(sold separately). Consult owners manual
for locations.
WIRE COLOR DESIGNATORS
DESIGNADORES DEL COLOR DEL ALAMBRE
INDICATEURS DE COULEUR DE FIL
BLACK BATTERY POWER (+)
NEGRO ENERGÍA DE BATERÍA (+)
NOIR PUISSANCE DE BATTERIE (+)
WHITE GROUND ( - )
BLANCO TIERRA ( - )
BLANC LA TERRE ( - )
RED BRAKE SIGNAL FROM VEHICLE
ROJO SEÑAL DEL FRENO DEL VEHÍCULO
ROUGE SIGNAL DE FREIN DE VÉHICULE
BLUE ELECTRIC BRAKE FEED TO TRAILER
AZUL ALIMENTACIÓN ELÉCTRICA DEL FRENO AL ACOPLADO
BLEU ALIMENTATION ÉLECTRIQUE DE FREIN AU BAS DE PAGE
HARNESS HOUSING VEHICLE HOUSING
ELECTRIC BRAKE CONTROL
ADAPTER HARNESS
ARNÉS DEL ADAPTADOR DEL CONTROL
DEL FRENO ELÉCTRICO.
FAISCEAU D’ADAPTATEUR DE COMMANDE
DE FREIN ÉLECTRIQUE
11/30/2010
INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-877-287-8634
51441