Installation Guide

CURTMFG.COM

•

NEED ASSISTANCE?

•

87 7.2 87.86 34

•

51180-INS-RE

•

PAGE 2

Search Select & Connect Enter 6-Digit Pin#

The vehicle needs to be running or the

ignition in the 'ON' position with the vehicle in park.

At any moment during setup, if the LED on the

Echo

is red, stop and refer to the 'Troubleshooting Guide'.

1. Enable Bluetooth in your mobile device settings.

DO NOT pair the Echo

through your phone’s Bluetooth

menu. Bluetooth connection will be done through the app in step 3.

2. Once the Echo

is inserted into the vehicle's

7-way the LED will ﬂash blue. The Echo

now ready to pair with the mobile application.

3. Launch the app and scan for the Echo

. Once the 'Echo

Brake Controller' is visible, select it. You will then be prompted

to enter the six-digit PIN, found under the cap of the brake

controller unit or on the provided quick reference card. Once

pairing is complete, the LED light will be solid blue.

4. Plug the trailer's 7-way connector into the Echo

brake controller

while parked on a level surface. The LED light on the Echo

will

ﬂash yellow for ﬁve to eight seconds while calibration occurs.

Once the device is calibrated the LED will turn solid green.

INITIAL SETUP FOR BLUETOOTH CONNECTION

NOTICE

DOWNLOAD THE MOBILE APPLICATION

Mobile applications are available for Apple and Android OS. They can be accessed in the App Store

or Google Play by scanning the respective QR code below or searching for 'Echo

Smart Control'.

• Apple OS Requires IOS 5 or higher

• Android OS requires Android 4.3 or higher

• Bluetooth must be enabled on your device for pairing to occur

• After the app is installed, follow the prompts for setup