Installation Guide

PAGE 6
Display
The display shows the output setting when the control is activated.
It is used to setup and monitor the brake control.
BLANK DISPLAY
Not activated by
either brake pedal
or manual control
Ready
No trailer connected
Brake pedal or
manual activation
Trailer disconnect
See display modes
error conditions (pg 7)
Output: 1 to 8 bars
Trailer connected
Brake pedal or
manual activation
Sync setting, 1 to 8 bars
Trailer connected
Brake pedal or
manual activation
Brake circuit overload
or short
See display modes
error conditions, (pg 7)
SINGLE GREEN SINGLE RED
GREEN BARS
GREEN BARS WITH FLASHING GREEN
FLASHING RED