Installation Guide

56464-INS-RA
•
04/20/2021
•
ECN8142
•
PAGE 2 OF 4
Step 1
Locate the vehicle's battery in the engine
compartment on the driver side and disconnect
the negative battery terminal. Be sure to fasten
this wire down and away from the battery
while completing the installation process.
Step 2
Open the vehicle trunk. Remove all trunk floor
coverings. Remove the spare tire lock and nut
securing the floor cover to the spare tire.
Step 3
Remove the scuff panel by pulling out on
the bottom and then up. Take care not to
damage the alignment tabs on the back.