Installation Guide

ManualsBrandsCURT ManualsOtherAdjustable Channel Mount with Dual Ball (3" Shank, 21,000 lbs., 10-5/8" Drop)

CURTMFG.COM

•

NEED ASSISTANCE?

•

87 7. 2 8 7. 8 6 3 4

•

45928-INS-RA

•

PAGE 1

Weight Capacity: 2" Ball

Gross trailer weight (GTW) 10,000 lbs.

Weight Capacity: 2-5/16" Ball

Gross trailer weight (GTW) 21,000 lbs.

INSTALLATION MANUAL

45928

Parts List

1 Channel mount

1 Dual ball

2 Channel pin

2 Channel clip

1 Hitch pin & clip

Product Photo

WARNING

Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of the

channel-mount system are intended to represent the capability of the product and in no way

reflect the ratings or capacity of the towing system it is being used with. The consumer or

operator are strongly advised to know the ratings of the various components of the towing

system and never exceed the limits of the lowest rated component being used.

Use of any pin other than what is provided by the manufacturer

could be a serious safety hazard and will void the warranty.

Never hook up trailer safety chains to the mount system. Ensure the safety

chains operate freely around the mount system and do not become entangled.

Level of Difﬁculty

Easy

NOTICE

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

Product Registration and Warranty

CURT Group stands behind our products with industry-leading warranties.

Provide feedback and help us to improve our products by registering your purchase at:

warranty.curtgroup.com/surveys

Step 1

Insert the adjustable channel mount into

the vehicle's trailer hitch receiver tube and

secure with the provided hitch pin & clip or

hitch lock (hitch lock sold separately).

Step 2

Determine the tow height needed for your

towing situation. Raise or lower the dual ball

to the desired height and insert the provided

channel pins through the dual ball and

adjustable channel mount. Secure the pins

with the provided channel clips

WARNING

The provided pins are specifically

engineered for this system. If replacement

pins are needed, they must be replaced with

original factory mount pins.

Summary of content (1 pages)

PAGE 1
INSTALLATION MANUAL 45928 WARNING Level of Difficulty Easy Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of the channel-mount system are intended to represent the capability of the product and in no way reflect the ratings or capacity of the towing system it is being used with. The consumer or operator are strongly advised to know the ratings of the various components of the towing system and never exceed the limits of the lowest rated component being used.