Installation Guide

ManualsBrandsCURT ManualsAutomotive20,000 lbs. 4 in. Drop Commercial Duty Forged Trailer Hitch Ball Mount Draw Bar (2-1/2 in. Shank)

1

2

3

4

Table Of Contents

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com

3. Remove (6) bolts that secure the bumper beam

to the end of the frame, return bolts to owner.

Note: Support the bumper when removing

fasteners.

4. Gently flex fascia tabs back and raise hitch into

position lifting and rotating the bumper beam to

create room. Secure the hitch between the end

of the frame rail and the bumper beam using

supplied M8 hex bolts and 3/8" conical washers.

5. Torque all M8 hardware to 23 ft-lbs.

Reinstall fascia tabs and underbody panels in

place using fasteners removed in Step 2.

Reinstall exhaust isolators.