Installation Guide

58970-INS-RB
PAGE 3
Step 5
Once the 4-flat has reached just behind the
front tire, use a fish wire between the inner
and outer fender to route through to where
the fender and wheel well meet.
Step 7
Attach the 4-flat to the fish wire and pull up
to the top of the engine compartment. Finish
routing the 4-flat wire around the body mount
and above the sub frame, out of the way of any
possible road debris, and up in between the
inner and outer fender.
Step 6 - How to use fish wire
A) Fish wire is a way to push or pull
an electrical wire through a blind hole.
Make sure the wire is long enough
to stick out on the other side.
Insert the fish wire through the blind
hole and locate it on the other side.
B) Use tape to secure the harness
to the fish wire and pull back up.
The fish wire or harness may get hung up on
something, if this happens you may have to
push back down, wiggle it around or twist the
wire to loosen it from what it’s hung up on.
Fish wire could be anything from a cut-up wire
hanger, stiff wire, rope or string depending on
what is needed for the installation.
A
B
A
B