Installation Guide

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A STRAIGHT LINE PULL: 9,000 LBS. MAX. LINE PULL.

HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
1-877-287-8634


Curt Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
3,500 350
HONDA PILOT AND RIDGELINE
10/12/2012
33328
60
25
30
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
Parts List
DESCRIPTIONPART NUMBERQTYITEM
HEX BOLTM12-1.25 x 35mm41
CONICAL TOOTHED WASHER1/2"42
.250 x 1.00 x 2.00" SQUARE HOLE SPACERCM-SP723
HEX FLANGE NUT7/16-1424
CARRIAGE BOLT7/16-14 x 1 1/225
7/16" FISHWIRE7_16 FISHWIRE16
3
5
2
1
6
4
ROUND SUPPORT BEAM
BUMPER BEAM
BUMPER SUPPORT
EXISTING WELDNUTS
(BOTH SIDES)
- LOWER FASCIA
- TRIM FASCIA
- NO DRILLING REQUIRED
TOOLS REQUIRED
RATCHET
6" EXTENSION
TORQUE WRENCH
SMALL SCREWDRIVER
10mm SOCKET
17mm SOCKET
11/16" SOCKET
PRY BAR