Installation Guide

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A STRAIGHT LINE PULL: 9,000 LBS. MAX. LINE PULL.
*** DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY. ***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-877-287-8634
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
3,500 350
HONDA PILOT AND RIDGELINE
10/28/2020
33328
60
25
30
HITCH WEIGHT:
LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
HHCS,M12x1.25,35,CL10.9,YZ10-1027541
WASHER,S-CON,1/2,YZ30-0014942
.250 x 1.00 x 2.00" SQUARE HOLE SPACERCM-SP723
NUT,SER-FLANGE,7/16-14 UNC,GRD8,YZ20-001032
4
BOLT,CAR,7/16-14 UNC,1-1/2,GRD8,YZ
10-1028225
7/16" FISHWIRE7_16 FISHWIRE
16
3
5
2
1
6
4
ROUND SUPPORT BEAM
BUMPER BEAM
BUMPER SUPPORT
EXISTING WELDNUTS
(BOTH SIDES)
- LOWER FASCIA
- TRIM FASCIA
- NO DRILLING REQUIRED
TOOLS REQUIRED
RATCHET
6" EXTENSION
TORQUE WRENCH
SMALL SCREWDRIVER
10mm SOCKET
17mm SOCKET
11/16" SOCKET
PRY BAR