Installation Guide

Table Of Contents
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
HHCS,M8x1.25,35,CL10.9,YZ10-10393
7
1
WASHER,FLAT,M830-0002142
WASHER,LOCK,M830-0002243
WASHER,S-CON,3/8,YZ30-0014834
INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
1. Open the panel on the driver side of the rear cargo area
inside the vehicle. Disconnect the wiring going to the tail light
and then remove the plastic screw retaining the tail light.
Grasp the sides of the tail light and gently pull straight to the
rear of the vehicle to remove. Repeat for passenger side.
Save for reinstallation.
2. Remove the (4) screws from each wheel well using a T25
Torx bit and save for reinstallation.
DESIGNED FOR USE WITH
BALLMOUNT #45521
EURO MOUNT
OPTION AVAILABLE
#45571 (1 7/8" BALL)
#45572 (2" BALL)
EXISTING VEHICLE
WELD NUTS (7)
EXISTING
BUMPER
BEAM
1
413
2
5.00 in
2.50 in
TRIM DIAGRAM FOR
GOLF SPORTWAGEN
4MOTION VEHICLES