Installation Guide

CURTMFG.COM
•
NEED ASSISTANCE?
•
877.287.8 634
•
16190-INS-RA
•
PAGE 8
REMOVE & REINSTALL
Removal - Option 1
To remove the entire 5th wheel hitch from
the base rails, follow the steps and diagram below.
1. Remove the base rail pins & clips.
2. Remove the 5th wheel unit from the base rails.
Removal - Option 2
We recommended the head be separated from the main body, and the
legs and main body be removed as one unit. Note: If binding occurs,
loosen the four M14 leg mounting bolts to free them from the rails.
1. Remove the center lynch pin and large pivot pin.
2. Lift and remove the head assembly and yoke.
3. Remove the base rail pins & clips.
4. Lift and remove the main body and leg assembly.
Re-installation
Reinstall the 5th wheel in the reverse order it was removed. If
removal method was per Option 2, please follow the steps below.
1. Place the main body, still attached
loosely to the legs, into the base rails
2. Insert the four base rail pins & clips
3. Re-torque the four M14 hex bolts to 100 ft-lbs.