Owners manual

***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813
MOUNTING RAIL KIT
10/30/2017
16150
WARNING!! BRAKE, FUEL, AND ELECTRICAL LINES MAY NEED TO BE LOOSENED OR REPOSITIONED TO PROVIDE CLEARANCE
FOR NEW HARDWARE. SOME MODELS REQUIRE MODIFICATION OR REMOVAL OF HEAT SHIELDS. ON SHORT BED MODELS,
CHECK FOR ADEQUATE TURNING CLEARANCE BETWEEN THE FRONT OF ALL TRAILERS AND THE TRUCK CAB.
PAGE 1 OF 6
CURT Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser.
If the product is found to be defective, CURT Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid,
with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT Manufacturing LLC.'s liability is limited to
repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
PERIODICALLY CHECK THIS HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Scan
for more
information
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
MOUNTING RAILSCM-16150-MR21
.375" FRONT BRACKETCM-16150-FB22
.375" PASSENGER SIDE REAR BRACKETCM-16150-PSRB
13
.375" DRIVER SIDE REAR BRACKETCM-16150-DSRB
14
CARRIAGE BOLT5/8-11 x 3 1/2 CARRIAGE
25
.75 x 1.75 SPACERCM-16150-SP1
46
.313" SPACERCM-16150-SP24
7
CARRIAGE BOLT5/8-11 x 3 CARRIAGE 28
WASHER5/849
HELICAL LOCK WASHER5_8 LOCK WASHER410
HEX NUT
5_8 - 11 HEX-NUT
4
11
HEX FLANGE NUT
HFN 1213812
1/2 - 13 x 1 1/2 WHEEL BOLT1/2 - 13 x 1 1/2 WB
813
.250 x 1.00 x 1.50" ROUND HOLE SPACERCM-SP50
114
1/2" FISHWIRE1_2 FISHWIRE
115
DRIVER SIDE
FRAME RAIL
DRILL HOLES
(8) PLACES
PASSENGER SIDE
FRAME RAIL
12
2
9
10
11
4
13
5
1 6
7
8 1 6
7
14
15
2 PLACES
2 PLACES