Installation Guide

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY

INSTALLATION INSTRUCTIONS

RAM OEM COMPATIBLE 5TH WHEEL LEGS

Provide this manual, in its entirety, to the end-user

PARTS LIST

Item# Qty Description

1 1 Passenger side leg assembly

2 1 Driver side leg assembly

3 1 Cross support weldment

4 2 Hex head cap screw, M14 x 75, CL8.8

5 2 Washer, flat, M14

6 2 Washer, lock, M14

7 4 Nulock nut, M14 x 2, CL10.9

Figure 1

PAGE 1 • 16021-INS-RA • 1.877.287.8634 • NEED ASSISTANCE? • CURTMFG.COM

PAGE 1
INSTALLATION INSTRUCTIONS WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY RAM OEM COMPATIBLE 5TH WHEEL LEGS Provide this manual, in its entirety, to the end-user PARTS LIST Item# Qty Description 1 1 Passenger side leg assembly 2 3 1 1 Driver side leg assembly Cross support weldment 4 2 Hex head cap screw, M14 x 75, CL8.8 5 6 2 2 Washer, flat, M14 Washer, lock, M14 7 4 Nulock nut, M14 x 2, CL10.9 1 7 2 3 Figure 1 5 6 4 PAGE 1 • 16021-INS-RA • 1.877.287.
PAGE 2
ASSEMBLY (CONT ) WARNINGS Provide this manual, in its entirety, to the end-user. Read and understand instructions before using this product. Fully instruct and demonstrate the operation of this 5th wheel hitch to the end user. Include the importance of observing all warnings contained herein, including warning labels on 5th wheel hitch mid section. Serious injury or death may result if the warnings below are not observed.
PAGE 3
T-BOLT ADJUSTMENT Step 1 The locking T-bolts have been pre-installed to ease installation of the 16021. Due to possible variation in the trucks mounting locations, some adjustments may be required. If one or more of the locking handles will not close, begin adjustment by removing the cotter pin securing the castle nut above the handle. See Figure 5. Step 2 Loosen the castle nut a quarter-turn while pressing down on the T-bolt.