Owners manual

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Raise the hitch into position and secure it to the frame rails
using hex flange nuts. Under the spare tire carrage beam,
slide a 5/8" hex flange nut from the end of the frame and
install the 5/8" hex bolt, lock washer and flat washer.
4. Place the 1/2" hex bolts and concial tooth washers into
position as shown. Install 1/2" hex flange nuts.
5. Torque all 1/2" hardware to 110 lb-ft and all 5/8" hardware
to 212 lb-ft.