Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
1. Temporary raise hitch into position, aligning mounting holes
of hitch with mounting holes in vehicle frame. Using hitch as
template, mark location forwardmost mounting holes. Lower
hitch and enlarge vehicle mounting holes where marked
using die grainder.
NOTE: Lowering exhaust may ease installation.
2. Fishwire (2) CM-SP10 spacers and (2) 1/2" carriage bolts
through enlarged hole and out mounting holes, both sides.
Reverse fishwire (1) CM-SP10 spacer and (1) 1/2" carriage
bolt through and out enlarged hole on both sides of vehicle.
Use Fishwire and Reverse Fishwire Diagrams as reference.
PASSENGER
FRAME RAIL
DRIVER
FRAME RAIL
ENLARGED
HOLE
(BOTH SIDES)
1
2
3
4
1 REVISED STEP 1 WITH PROPER VERBIAGE. 3/6/2020 DAM
REVISION HISTORY
REV DESCRIPTION DATE APPROVED