Installation Guide

ManualsBrandsCURT ManualsAutomotiveClass 3 Trailer Hitch, 2" Receiver, Select Audi Q5, Towing Draw Bar

1

2

3

4

5

Table Of Contents

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com

2. Pull away wheel well lining to reveal (6) screws,

(3) on each side, and remove using a T25 torxbit

socket.

1. Remove (4) screws from the bottom of the

bumper fascia and (2) screws from the bottom

inside of the wheel well, (1) in each wheel well,

using a T25 torxbit socket.

EXISTING VEHICLE

HARDWARE (BOTH SIDES)

VEHICLE FRAME

BUMPER BEAM

BUMPER BEAM

BRACKET