Installation Guide

I NSTALLATI ON W ALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
.250 x 1.50 x 3.00" SQUARE HOLE SPACERCM-SP421
HEX FLANGE NUTHFN 121362
1/2" FISHWIRE1_2 FISHWIRE23
.250 x 1.00 x 2.00" SQUARE HOLE SPACERCM-SP1244
1/2" WEDGE SPACERCM-SP382
5
CARRIAGE BOLT1/2-13 x 1 1/266
PASSENGER SIDE
FRAME RAIL
DRIVER SIDE
FRAME RAIL
6
1
2
5
4
1.) Lower exhaust by removing rubber isolators (3 each side)
as shown.
Note: Support exhaust from underneath after lowering.
2.) Fishwire the carriage bolts and small square hole spacers
through the space between the bumper beam and the end
of the frame rail for both sides.
3