Owners manual

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
1. On the bumper fascia, locate and remove (3) plastic
push-pins using the panel removal tool. Set aside
for later reinstallation.
2. In each rear wheel well, locate and remove (4)
screws using a T15 torxbit socket. Pull back the
wheel well to reveal (1) screw and remove using a
7mm socket. Set screws aside for later reinstallation.
EXISTING VEHICLE
HARDWARE (BOTH SIDES)
BUMPER BEAM
VEHICLE FRAME
EXHAUST BRACKET
(BOTH SIDES)
DESIGNED FOR
USE WITH BALL
MOUNT #45521
EURO MOUNT
OPTION AVAILABLE
#45571 (1 7/8" BALL) &
#45572 (2" BALL)