Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
BOLT,CAR,7/16-14 UNC,1-1/4,GRD8,YZ10-1028141
NUT,SER-FLANGE,7/16-14 UNC,GRD8,YZ20-0010342
.250 x 1.00 x 2.00" SQUARE HOLE SPACERCM-SP7
43
7/16" FISHWIRE7_16 FISHWIRE44
4
1
3
2
PASSENGER SIDE
FRAME RAIL
DRILLED
HOLES
(BOTH
SIDES)
DRIVER SIDE
FRAME RAIL
DESIGNED FOR
USE WITH BALL
MOUNT #45521
EURO MOUNT
OPTION AVAILABLE
#45571 (1 7/8" BALL) &
#45572 (2" BALL)
1. Raise hitch into position against the back of the
frame rail. Using the hitch as a template, center
the holes on the frame rail and use a paint pen
to mark out the (4) hole locations.
2. Lower the hitch and use a drill and 1/4" drill bit to
drill (4) holes located at the marked areas from
step 1. Then, use a 1/2" drill bit to open up the
holes to the final size.
ACCESS
HOLE
(BOTH
SIDES)