Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
BOLT, CAR,1/2-13 UNC,1-1/2,GRD8,YZ10-1028721
HHCS,M12x1.25,45,CL10.9,YZ
10-1033122
FB,M8x1.25,35,CL10.9,YZ10-1033343
NUT,SER-FLANGE,1/2-13 UNC,GRD8,YZ
20-0006224
WASHER, S-CON,1/2,YZ
30-0014925
.250 x 1.00 x 2.50" SQUARE HOLE SPACERCM-SP1026
1/2" FISHWIRE1_2 FISHWIRE
27
PASSENGER SIDE
FRAME RAIL
EXISTING M12 WELDNUTS ON
VEHICLES BUILT IN JAPAN
EXISTING M8 WELDNUTS ON
VEHICLES BUILT IN THE USA
ACCESS HOLE
BOTH SIDES
DRIVER SIDE
FRAME RAIL
DESIGNED FOR USE WITH
BALL MOUNT # 45521
EURO MOUNT OPTION AVAILABLE
#45571 (1 7/8" BALL) & #45572 (2" BALL)
EXISTING WELDNUTS
IN ALL FRAMES
7
6
6
1.Lowerexhaustbyremoving(2)rubberisolatorspermufflerand(1)
rubberisolatorforwardofthemuffler.OnJapanbuiltvehicles
remove
tiedownbracketfrompassengersideframerail.OnUSAbuiltvehicles
removerearexhausthangerfromdriversideframerail.Ondual
exhaustvehiclesremoverearexhausthangerfrombothframerails.
Saveforreinstallation.NOTE:
Supportexhausttopreventdamage.
2.RemoveheatshieldsandtrimusingHEATSHIELDTRIMDIAGRAMfor
referenceandreinstall.Removeplasticunderbodypanelandtrim
usingPANELTRIMDIAGRAMforreference.Saveforreinstallation.
EXHAUST
HANGER
EXHAUST HANGER
HEAT SHIELD TRIM DIAGRAM
PANEL TRIM DIAGRAM
2.00 in
4.25 in
TIE DOWN BRACKET ONLY ON
VEHICLES BUILT IN JAPAN
1.00 in
3.25 in