Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
BOLT,CAR,7/16-14 UNC,1-1/4,GRD8,YZ10-1028141
NUT,SER-FLANGE,7/16-14 UNC,GRD8,YZ20-0010342
7/16" FISHWIRE7_16 FISHWIRE
43
SPACER11529-SP
44
PASSENGER SIDE
FRAME RAIL
DRIVER SIDE
FRAME RAIL
3
1
4
2
DESIGNED FOR USE WITH
BALL MOUNT # 45521
EURO MOUNT OPTION AVAILABLE
#45571 (1 7/8" BALL) #45572 (2" BALL)
1. Relocate electrical harnes from under the driver side of the
bumper beam to above the bumper beam. Remove
underbody panel from passenger side frame rail.
Save for reinstallation in Step 4.
NOTE: On all wheel drive vehicles lower the exhaust by
removing (2) rubber isolators.
2. Fishwire 7/16" carriage bolts and 11529-SP spacers into
lower holes in the outside of the frame rails.