Instruction Manual

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
1. Locate in wheel well and remove (1) screw on
each side, and (8) screws on bottom of rear
fascia using a 8mm socket.
2. Open rear hatch doors to locate and remove
(2) push pins using a pry tool.
EURO MOUNT
OPTION AVAILABLE
#45571 (1 7/8" BALL)
#45572 (2" BALL)
DESIGNED FOR USE WITH
BALL MOUNT #45521
VEHICLE FRAME
EXISTING VEHICLE STUDS
(BOTH SIDES)
VEHICLE REAR BUMPER
EXISTING VEHICLE HARDWARE
(BOTH SIDES)