Owners manual

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

Parts List

DESCRIPTIONPART NUMBERQTYITEM

CARRIAGE BOLT1/2-13 x 1 1/261

.250 x 1.00 x 3.00" SQUARE HOLE SPACERCM-SP6

HEX FLANGE NUTHFN 121363

1/2" FISHWIRE1_2 FISHWIRE

1) Lower exhaust by removing (3) rear rubber isolators.

See RUBBER ISOLATOR REMOVAL DIAGRAM.

If needed to access outside hangers remove plastic

underbody panel by removing (7) plastic fasteners.

NOTE: Support the exhaust as required.

TRIM 1" HOLE ON

DIMPLE ON "R↑" AND "M"

2) Remove the heat shield by removing the 4 small screws

with a 10mm socket. Cut (2) holes in the heat shield as

shown in the diagram to left.

DESIGNED FOR USE WITH

BALLMOUNT #45521

EURO MOUNT OPTION AVAILABLE

#45571 (1 7/8" BALL) OR #45572 (2" BALL)

ENLARGE ACCESS HOLE

(BOTH SIDES)

PASSENGER SIDE

FRAME RAIL

DRIVER SIDE

FRAME RAIL