Owners manual

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Enlarge forward most hole passenger side frame rail hole.
Fishwire 3/8" carriage bolt and 11449-SP spacer through
the large access hole in the passenger side frame rail and
out the enlarged hole. Reverse fishwire remaining 3/8"
carriage bolt and spacer into the large access hole.
4. Place u-bolt into position in the vehicle recovery loop. Raise
the hitch into position in between the last bracket removed in
Step 1 and the driver side frame rail. Loosely secure with
provided M8 bolts and conical tooth washers on the driver
side. Secure remaining fasteners using 3/8" flange nuts.
5. Tighten 3/8" bolts to 37 ft-lbs. Tighten M8 bolts to 23 ft-lbs.
Repeat Step 1 in reverse order to reinstall components
removed from the vehicle. If desired trim underbody panel as
shown below using contours of the part as a guide.
0.406"
Ø