Installation Guide

Parts List
DESCRIPTIONPART NUMBERQTYITEM
BOLT,CAR,7/16-14 UNC,1-1/2,GRD8,YZ10-1028241
.250 x .88 x 2.25" SPACERCM-SP242
NUT,SER-FLANGE,7/16-14 UNC,GRD8,YZ
20-0010343
7/16" FISHWIRE7_16 FISHWIRE44
INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
4
3
1
2
PASSENGER
FRAME RAIL
ACCESS HOLE
VEHICLE MUFFLER
DRIVER FRAME RAIL
ACCESS HOLE
DESIGNED FOR USE WITH EURO BALLMOUNT
#45571 (1 7/8" BALL) & #45572 (2" BALL)
1. Fishwire CM-SP2 spacers and 7/16-14 carriage bolts through access holes
and into attaching holes. Leave fishwires attached.
Note: Driver side requires reverse fishwire for rearmost fastener.
2. Raise hitch into position, being careful not to push bolts back into frame.
3. Remove fishwires. Secure with 7/16-14 flanged nuts.
4. Torque all 7/16-14 fasteners to 70 ft.-lbs.
Installation is complete.
DESIGNED FOR
USE WITH
BALLMOUNT #45521