Installation Guide

ManualsBrandsCURT ManualsOtherClass 1 Trailer Hitch, 1-1/4" Receiver, Select Nissan Sentra, Towing Draw Bar

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND

CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing LLC. may repair or replace

the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement

of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

For more information log onto www curtmfg com & for helpful towing tips log onto www hitchinfo com

MAKE: STYLE:

MI N.

30 / 6 0

WARNI NG: NEVER EXCEED YOUR VEHI CLE MANUFACTURER'S RECOMMENDED TOWI NG CAPACI TY

WEI GHT CARRYI NG:

I NSTALLATI ON TI PS: I NSTALLATI ON TI ME:

I NSTALLATION REQUI RES:

VEHI CLE PHOTO:

HI TCH I LLUSTRATI ON:

REPRESENTATI VE PHOTO

MAKE SURE YOUR HI TCH MATCHES

LEVEL OF DI FFICULTY:

EASY

EASY MODERATE CHALLENGI NG

THE I NSTALL TI ME LI STED I S FOR PROFESSI ONAL

I NSTALLERS. I F YOU ARE HESITANT TO UNDERTAKE

THI S TASK ON YOUR OWN, CONTACT AN AUTHORI ZED

CURT I NSTALLER FOR ADDI TI ONAL ASSI STANCE.

1. BEFORE YOU BEGI N I NSTALLATI ON, READ ALL

I NSTRUCTI ONS THOROUGHLY.

2. TO EASE I NSTALLATI ON, 2 PEOPLE MAY BE

REQUI RED.

3. USI NG PROPER TOOLS WI LL GREATLY I MPROVE

THE QUALI TY OF THE I NSTALL AND REDUCE THE

TI ME REQUI RED.

4. NEED HELP OR HAVE SOME QUESTI ONS?

CALL TECHNI CAL SUPPORT AT 800.798. 0813

Safety glasses should be

w orn at all times while

installing t his product

YEARS: 201 3 NI SSAN MODEL: SENTRA SEDAN

2,000

200

TRAI LER WEI GHT:

TONGUE WEI GHT:

11349 I NSTALLATI ON I NSTRUCTI ONS

LBS.

11 / 19/ 12

WARNI NG:

WE RECOMMEND THE USE OF 18 050 STABI LI ZI NG STRAPS FOR ALL NON- TRAI LER

( WHEEL- LESS) LOADS. PLEASE SEE THE CURT CATALOG OR VI SI T US ONLI NE AT

WWW.CURTMFG.COM FOR FURTHER I NFORMATI ON.

SAFETY

GLASSES

SCREW

DRI VER

RATCHET

SOCKET

EXTENSI ON

SOCKET

9/ 16"

BOXED

END W RENCH

9/ 16", 3/ 4"

TORQUE

WRENCH

ENLARGE ACCESS HOLES

FISHWIRING REQUIRED

REVERSE FISHWIRING

REQUIRED

(EXCLUDING SR VERSION)

Summary of content (5 pages)

PAGE 1
1349 YEARS: 2 01 3 Safety glasses should be w orn at all times w hile installing t his product . I NSTALLATI ON I NSTRUCTI ONS MODEL: SENTRA (EXCLUDING SR VERSION) MAKE: NI SSAN STYLE: SEDAN W ARNI NG: NEVER EXCEED YOUR VEHI CLE MANUFACTURER'S RECOMMENDED TOW I NG CAPACI TY WEI GHT CARRYI NG: I NSTALLATI ON TI ME: TRAI LER W EI GHT: TONGUE W EI GHT: 30 / 6 0 MI N. THE I NSTALL TI ME LI STED I S FOR PROFESSI ONAL I NSTALLERS.
PAGE 2
 Parts List ITEM QTY PART NUMBER 1. Locate (2) plastic fascia clips at rear of vehicle. Use flat head screwdriver to pry out and gain additional visibility and access to rear of vehicle frame. Retain clips for reinstallation. DESCRIPTION 1 2 CM-SP6 .250 x 1.00 x 3.
PAGE 3
 3. Fishwire forward 1/2" mounting hardware through the frame access hole as shown. See fishwire diagram for reference. 4. Reverse fishwire rearward 1/2" mounting hardware into the frame access hole as shown. 5. Raise hitch into position, attaching to the fishwired hardware on the driver side. 3/8" hardware will push through the rear of the vehicle frame on the passenger side and attach with a 9/16" socket as shown. Hold tightly on the back side with a boxed end wrench to secure.
PAGE 4
 7. Reattach (2) plastic fascia clips at rear of vehicle. Torque all 1/2" hardware to 110 ft-lbs, torque all 3/8" hardware to 45 ft-lbs.
PAGE 5
NISSAN SENTRA (EXCLUDING SR VERSION) 11349 11/15/12 GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 2,000 LBS. TRAILER WEIGHT & 200 LBS. TONGUE WEIGHT. * * * DO N OT EX C EE D V EH I CL E M AN U FAC T U RER 'S REC OM M E N DED T OW I N G C AP AC I T Y . * * * WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY 18050 STABILIZING STRAPS.