Installation Guide

HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
MINI COOPER COUNTRYMAN
5/23/2019
11333
PAGE 4 of 5
7. Remove (4) 10mm plastic nuts from the bumper braces on the underside of the
vehicle as shown.
8. To remove bumper cover, gently pull each side of the bumper fascia rearward of
the vehicle and set bumper cover aside. (Models with reverse sensors will need to
disconnect (4) connectors)
9. Remove the (6) 15mm flange nuts attaching the bumper to the vehicle, remove
bumper and set aside.