Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
7. Remove the (2) 10mm bolts from under the rear hatch
securing the bumper fascia.
8. Remove (4) 10mm plastic nuts from the bumper braces
on the underside of the vehicle as shown.
9. To remove bumper cover, gently pull each side of the
bumper fascia rearward of the vehicle and set bumper
cover aside. (Models with reverse sensors will need to
disconnect (4) connectors)
10. Remove the (6) 15mm flange nuts attaching the bumper
to the vehicle, remove bumper and set aside.