Owners manual

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY AUXILIARY STABILIZING STRAPS.
** FAILURE TO PROPERLY SUPPORT NON-TRAILER LOADS WILL VOID PRODUCT WARRANTY**
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813
HITCH WEIGHT:
LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
2,000 200
35
30
NISSAN CUBE
10/1/2012
11202
60
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
CONICAL TOOTHED WASHER3/8"41
7/16" FISHWIRE7_16 FISHWIRE22
CARRIAGE BOLT7/16-14 x 1 1/223
.250 x 1.00 x 2.00" SQUARE HOLE SPACERCM-SP724
HEX FLANGE NUT7/16-142
5
HEX BOLTM10-1.25 x 3516
Hex NutM10 - 1.25 HEX-NUT37
1.00
Ø
TOOLS REQUIRED
RATCHET
10" EXTENTION
ROTARY TOOL
TORQUE WRENCH
16MM WRENCH
16MM SOCKET
17MM SOCKET
7/16" SOCKET
-REMOVE EXISTING HARDWARE
-FISHWIRE HARDWARE
-HOLE ENLARGEMENT
-LOWER EXHAUST
3
4
2
5
PASSENGER SIDE
FRAME RAIL
6
1
7
EXISTING
HARDWARE
DRIVER SIDE
FRAME RAIL
ENLARGE ACCESS HOLE
EXISTING
WELD NUT
MOUNTING HOLES
PAGE 1 OF 2
29138
DESIGNED FOR USE WITH
BALL MOUNT # D-20 / 45520