Owners manual

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Enlarge the forward most access holes to allow 7/16-14
carriage bolts and SP7 spacers to pass through.
Note: If present, remove any tape covering holes in the
frame rails.
4. Fishwire 7/16-14 carriage bolts and SP7 spacers through
the access holes and out the rear-most holes in the frame
rails, both sides.
5. Reverse fishwire 7/16-14 carriage bolts and SP7 spacers
in the access holes, both sides.
6. Mark heat shield for trimming and confirm the fit. Trim
heat shield and reattach using (4) fasteners removed
in Step (2).
HEAT SHIELD TRIM DIAGRAM
10.00 in
13.00 in
1.00 in