Owners manual

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
5. Reverse fishwire 7/16" carriage bolt and CM-SP2 spacer
into position in each frame rail. See REVERSE PULL
FISHWIRE TECHNIQUE on page 2.
6. Fishwire (2) 7/16" carriage bolts and (2) CM-SP2 spacers
into position in bumper beam through access holes. See
FISHWIRE TECHNIQUE on page 2. (Note: Leave fishwires
attached to hardware to prevent loss in beam.)
7. Thread fishwires through appropriate mounting holes on
hitch and raise hitch into position.
8. Torque all 7/16" hardware to 70 ft-lbs. Reinstall (2) brackets
which were removed in step 2.