Owners manual

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
11. Remove (1) hex fastener and (2) push fasteners on each
side which were hidden by tail lights.



12. Carefully remove bumper cover. Pop sides off first and
then pull straight back. Note: Remove foam insert and
return to vehicle owner.
13. Remove bumper beam by removing (6) M8 fasteners
which hold bumper beam supports to trunk pan. Repeat
on other each side and return (12) M8 fasteners to vehicle
owner.
14. Raise hitch and bumper beam into position and secure to
vehicle with the included (12) 3/8" conical tooth washers
and (12) M8 hex bolts.