Product Manual

PAGE 4
•
51180-INS-RD
•
87 7.2 87. 86 3 4
•
NEED ASSISTANCE?
•
CURTMFG.COM
TROUBLESHOOTING GUIDE
Condition Problem Cause Possible Solution
LED does not light No power to brake control, no ground on vehicle 7-way Check vehicle power and ground wiring
Trailer mode not activated for vehicle
Vehicle requires trailer to activate 7-way power
Unable to connect to mobile devices No power to brake control, no ground on vehicle 7-way
Invalid Bluetooth PIN
Check Echo LED status for power
Input PIN from label or quick reference card
Enable Bluetooth or grant permissions
Check smartphone compatibility
Solid red LED for more than 10 seconds Hardware fault Contact CURT Product Support
Flashing red LED Contamination in trailer plug socket Check for clean and dry trailer plug
Short in trailer brake wiring Locate and correct short
Accelerometer error Unplug the brake control and plug it back in
Short or overload in trailer brakes Troubleshoot trailer brake circuit per
brake manufacturer's instructions
No trailer brakes, pedal or manual Mis-wired 7-way connector
Improper or corroded trailer wiring
Weak or missing ground
Confirm vehicle and trailer 7-way connections
No trailer brakes, pedal or manual
(device notification of error)
Loss of trailer connection, unplugged or bad wiring Confirm vehicle and trailer 7-way connections
No response on manual
override or brake output
Mis-wired 7-way connector
Improper or corroded trailer wiring
No or intermittent power to brake control
Weak or missing ground
Wireless connectivity error
Confirm vehicle and trailer 7-way connections
Check Bluetooth and application settings
Reduced braking power on
manual override or brake output
Weak or missing ground
Improper max power or sensitivity settings
Improper or corroded trailer wiring
Confirm vehicle and trailer 7-way connections
Check Bluetooth and application settings
Increase max power or sensitivity settings
Trailer brakes on all the time
(LED shows red)
Mis-wired 7-way trailer connector Confirm vehicle and trailer 7-way connections
App signals 'low voltage' Low battery voltage Check vehicle battery and replace if needed
Confirm vehicle 7-way connections and wiring
App signals a 'disconnect' Trailer connector is disconnected Reconnect the trailer connector
Confirm vehicle 7-way connections and wiring
App signals 'overload' Trailer brakes are overloaded Reconnect the trailer connector
Confirm vehicle 7-way connections and wiring
Check trailer brake wiring for short circuits
Wireless disconnect Mobile device disconnected while driving
No or intermittent power to brake control
Stop the vehicle and reconnect to mobile device
Confirm vehicle 7-way connections
WARRANTY & PRODUCT REGISTRATION
CURT Group stands behind our products with industry-leading warranties. You can help us continue
to improve our product line and help us understand your needs by registering your purchase at:
warranty.curtgroup.com/surveys
At CURT Group, the customer is king. We value your feedback and we use that information to
make improvements to our products. Please take a minute to let us know how we are doing.
CONNECT WITH US